Search results

Mickey Finn, check out the regulations for Lake Nipissing. Walleye none less than 46cm. I am sure the Camp will help Mickey Finn with the regulations. Lake Nipissing - including the waters of the French River from the Chaudière and the Little Chaudière dams to Lake Nipissing; the west bay of...

We have a couple pot holes in our cement boat ramp. These potholes are under water. Any idea how to do this repair and with what material. Holes line up perfectly with trailer tires. Quite a sudden stop when backing in. Any ideas would be greatly appreciated short of replacing slab. Thank You...

Tom Boley, the best educational, informative and instructive walleye youtuber https://www.youtube.com/channel/UCRExOt3taw88mQiuyXrQpzA/featured

Tom Boley YouTube. Check out Tom's youtube site for instructional and educational walleye videos. Tom's video are great teaching videos on how to catch and how to find walleyes. Not so much for big water trolling but some of his techniques should be able to be applied to Lake Erie...

What speed of troll is this chart for?

Pan fried walleye, dip in egg and milk, rolled in Corn Flake crumbs with garlic salt. easy, the best for me. Beanstir

I was out this morning and sliced the gills and cut the neck below the gill cover on some lake trout. I dragged these fish for 10 minutes before putting on ice. There still was enough blood when I was taking the fillet off, that the board had to be hosed off after each fish. I might try gutting...

Thanks Chipper1 for the offer. Maybe we can trade a walleye troll for a day rigging for spring salmon in Owen Sound. I am retiring in time for the spring fishing season. Should be on the bite this year when I have 7 days a week to get out.

Thanks again for the replies. I checked Dbfishing.com for blades. Great selection and good prices but expensive to ship to Canada. I had $64 worth of stuff in the shopping cart and shipping was $36.80. Thanks Chipper for the tips. I appreciate your help. 'Real Pro's SportFishing' is...

Owen Sound, around the corner from www.luremaking.com. I am good with tying the harness, not sure about the colour combinations and types of beads. I ordered these metallic beads. http://www.luremaking.com/catalogue/catalogue-index/catalogue-items/simulated_pearl_beads_and_plated.htm I...

Thanks for the replies. gihisher, what type are the beads you are using? luremaking.com has gold beads "hollow metal beads" in 1/4", "Mother of pearl & gold/silver plated beads" size 6, "Metal Finished Plastic" size 5. I would like to try a harness with gold beads, not sure about the type of...

I was hoping to get a little advise on worm harnesses to be used late next spring and early summer. I plan on trying to go to the Erieau area to try my luck. I had some success in a northern lake using a number 5 blade with number 6 beads. This successful day was the first and only time I have...

Best wind site yet. Thanks for posting

Anyone try a Kiwi Dropper Loop Knot? http://www.fishingkites.co.nz/fishingknots/plat_fishing_knots.html. Reported knot strength of 94.8%. I tied a couple and cannot break knot before cutting my fingers. This may be the knot I was looking for. I looked up the dropper loop boards, great idea but...

Last year I tied a drop shot 2 hook perch rig (http://www.netknots.com/fishing_knots/drop-shot-rig) with a Palomar knot using 8 pound trilene XL. This year I would like to get the hook off of the main line 1 1/2" to 2". I have experimented with the Dropper Loop knot...

Thanks for the comments on this setup. Well I am that guy that reels all the lead. If we need to check a lure or make a change I am the one that does that. I didn't think I was being lazy. As with most fishing and hunting it would be far cheaper to go to the store to buy meat but that is not...

Thanks for your comment jammer. I would like to meet you at the dock. You failed on your attempt at being funny. jammer you are a disappointment

I am trying to use the 3 lengths of LC to get the lure down 15' and give some action to the lure, assuming the lure will dive 5' on its own, then the depth of LC and lure is 20'. I want to get down another 30' without putting alot of line out. I will look into a torpedo diver. We had success...

Last year I was able to get out in a friends boat for some great walleye action. We had good success off of planer boards using crankbaits, long lengths of leadcore at about 2.5 mph. I would like to change it up a little and use an inline weight or snap weight with 3 colours of lead core. I...

I have a question associated with this post. What is the best knot to tie fluorocarbon to swivels and hooks? My research came up with this. Am I on the right track with this knot. Thanks again for the question and replies. Beanstir