Nice sonar equipment Ryan..
heres my newest transducer I had to buy and remount because of a defective plug that plugs into my eagle LCD sonar unit.. the female end of the plug went through 17 years of heavy use of pluging in and removing every trip so the unit doesnt get damaged or stolen..
Heres a few photos of my sonar setup & mount..
Mounted new transducer same location, you can see the fastners with washers and nuts and sealant bottom left 2nd picture..so ya rewired new connection to battery and reconnected the charging harness..
I setup the 2 riggers on the boat so i could track the cannon balls on the sonar...tracking here at -40 feet..also runnin sliders see the hooks ...these erie walleyes are 2019..2 to 3+ lbs..see the humps on the bottom..
My friend Jeff has the same unit...cheap and effective..I also have a portable eagle sonar unit for the north...I made a heavy duty clamp on transducer mount for any size boat 14 footer or less fishin the north...its a must have and it works good
I need to up my equipment
Considering and mounting a wireless temp probe
possibly the Fishhawk XD4
I want trolling speed & temperature at the ball
The wireless probe will go on my Penn downrigger
Wire the unit to my small 12 volt battery..mount the display unit beside my eagle LCD
I need to bump up my erie cannon ball weight from 8lbs to 10 or 12lbs???
I want just enough blow back average 3mph trolling speed
average strike zone depth is 60 feet and it varys down to 90 feet..