Hello,
I currently have a HDS Carbon 12" and a 9". I have a LSS-2 hooked to the 12 as well as an airmar p66. I hooked up everything yesterday and turned the unit on. First time since Nov. The temp is showing, and the structure depth as well (side scan) the main depth showed at first but then stopped. I now have dashes. I have tried to do a soft reset, hard reset and even selecting the 12" in the network settings for the depth.... NONE of the above has worked ! I then unplugged the 12" and plugged in the 9" unit.... had the exact same results. I am thinking the P66 may be shot and in need of a replacement.
I am also thinking I may switch the LSS-2 out with the AI-3-1. But I need to know... does it show temp? Will it be ok driving the boat in 200-300' of great Lakes water and not losing bottom? I see the spec says it has 83hz which is what I think I used on the p66 to keep bottom. But I think the Lss-2 shows temp, or maybe its the airmar p66 that is getting the reading? Before I switch them out I need to know if the AI 3-1 shows temp? or would I need a different ducer for the temp reading?As well, I may take the boat out on sunday and see if the numbers somehow magically decide to appear again. If the ducer is shot, what airmar do you guys like for tracking bottom in deep water. I fish the great lakes and often 200-350' of water. The p66 didn't have any issues tracking bottom. Does anyone on here have any experience in the Great Lakes with the Tm150M, tm 165 HW or B75 H
I currently have a HDS Carbon 12" and a 9". I have a LSS-2 hooked to the 12 as well as an airmar p66. I hooked up everything yesterday and turned the unit on. First time since Nov. The temp is showing, and the structure depth as well (side scan) the main depth showed at first but then stopped. I now have dashes. I have tried to do a soft reset, hard reset and even selecting the 12" in the network settings for the depth.... NONE of the above has worked ! I then unplugged the 12" and plugged in the 9" unit.... had the exact same results. I am thinking the P66 may be shot and in need of a replacement.
I am also thinking I may switch the LSS-2 out with the AI-3-1. But I need to know... does it show temp? Will it be ok driving the boat in 200-300' of great Lakes water and not losing bottom? I see the spec says it has 83hz which is what I think I used on the p66 to keep bottom. But I think the Lss-2 shows temp, or maybe its the airmar p66 that is getting the reading? Before I switch them out I need to know if the AI 3-1 shows temp? or would I need a different ducer for the temp reading?As well, I may take the boat out on sunday and see if the numbers somehow magically decide to appear again. If the ducer is shot, what airmar do you guys like for tracking bottom in deep water. I fish the great lakes and often 200-350' of water. The p66 didn't have any issues tracking bottom. Does anyone on here have any experience in the Great Lakes with the Tm150M, tm 165 HW or B75 H